Explore our American market-focused catalog: precision roll-formed metal sandwich panels, structural basalt mineral wool, fire-rated MGO architectural substrates, and cleanroom partitions engineered to exceed IBC 2024 fire endurance codes.
Engineered for commercial hotel façades requiring non-combustible ratings and rainscreen weatherproofing. PU edge encapsulation blocks water vapor intrusion while basalt rock wool provides zero smoke toxicity.
Polyisocyanurate (PIR) rigid continuous thermal envelope offering exceptional flame spread index under 25. Micro-profiled 3D textured finishes satisfy strict urban architectural design guidelines without additional siding.
High-density open-cell polymer wall treatments engineered for sound dampening and flame spread suppression in multi-family commercial office suites, broadcasting studios, and acoustic mechanical partitions.
Next-generation magnesium oxysulfate (sulfate-based) non-combustible core that eliminates chloride weeping and fastener corrosion. Provides 2-hour passive structural fire stopping for interior shafts and tenant demising walls.
Precision-manufactured modular partition wall panels for cleanroom manufacturing, semiconductor fabrication, and pharmaceutical processing. Completely flush aluminum/steel trims with non-combustible interior cores.
Combines carbonized co-extrusion technology with architectural walnut aesthetics. Moisture-impervious, highly impact-resistant, and tested for ASTM E84 flame retardance for hotel lobbies and public assembly interiors.
Flame-retardant crosslinked polyethylene (XPE) modular sheets designed for rapid modular commercial interiors, residential remodels, and temporary exhibition spaces requiring wipe-clean moisture resistance.
Galvalume-clad exterior siding panels backed with high-density polyurethane insulation and aluminum foil reflective barrier. Built for exterior modular housing, modular steel structures, and WUI wildfire-resistant envelopes.
Deploying insulated fireproof assemblies across United States climate zones demands thorough compliance with the International Building Code (IBC 2024), ASHRAE 90.1 envelope energy mandates, and NFPA life-safety standards.
For non-combustible exterior façades over 40 feet in height, IBC Chapter 14 and Chapter 26 mandate continuous testing via NFPA 285. Our continuous mineral wool panels and PIR systems feature concealed fasteners that prevent lateral fire escalation across curtain walls.
Large-span distribution logistics centers across the Midwest and Southern US require strict Factory Mutual approvals. Our continuous polyurethane and polyisocyanurate panels deliver R-values up to R-48, zero-ODP blowing agents, and interlocking airtight tongue-and-groove joints.
High-tech chip foundries and cGMP clean spaces in Texas, Arizona, and California require inert, non-outgassing partitions. Our modular metal cleanroom partitions incorporate non-halogenated rock wool and aluminum honeycomb cores that resist aggressive biocide vapor wipe-downs.
The North American building sector is pivoting aggressively toward embodied carbon reduction, wildfire resilience in Western states, and ultra-strict continuous insulation standards.
The "Buy Clean" policy and LEED v4.1 certifications prioritize factory-produced panels with third-party verified Environmental Product Declarations (EPDs). Our continuous lamination lines utilize low-GWP HFO foaming blowing agents to minimize lifetime global warming impact.
Across California, Colorado, and Oregon, strict WUI codes (Chapter 7A) require exterior wall systems capable of resisting wind-borne embers and severe radiant thermal exposure. Basalt core sandwich panels offer zero flame ignition under 1200°C blowtorch trials.
Prescriptive cavity-only insulation is increasingly prohibited. Architectural insulated metal panels (IMPs) eliminate linear thermal bridging through structural studs, achieving whole-wall U-factors as demanding as U-0.036 across Northern Climate Zones 6 and 7.
| Insulation Core System | Thermal R-Value (per inch) | ASTM E84 Surface Burning | Fire Endurance (ASTM E119) | Primary U.S. Code Fitness |
|---|---|---|---|---|
| Structural Basalt Mineral Wool | R-4.0 – R-4.4 | Flame Spread: 0 | Smoke: 0 | Up to 3-Hour Fire Resistance | IBC Type I & II Buildings, Exterior Curtain Walls (NFPA 285) |
| Polyisocyanurate (PIR Foam) | R-7.2 – R-8.0 | Flame Spread: ≤ 20 | Smoke: ≤ 250 | Up to 1-Hour Fire Barrier | Cold Storage Logistics, Commercial Warehouses, Title 24 Facades |
| Magnesium Oxysulfate (MGO Board) | R-1.2 – R-1.5 | Flame Spread: 0 | Smoke: 0 | 2-Hour Structural Shaft Wall | Demising Multi-Family Partitions, Drywall Replacement, Elevator Enclosures |
| PU-Sealed Composite Hybrid | R-5.8 – R-6.5 | Flame Spread: ≤ 25 | Smoke: ≤ 300 | 1- to 2-Hour Rated Assembly | Architectural Hotels, Coastal High-Humidity Zones, Modular Buildings |
Originating in industrial steel fabrication and sandwich panel development since 2010, our multi-disciplined team integrates structural design, automated roll-forming, and strict QA/QC to serve global building supply chains.
Our 42-meter double-caterpillar continuous production lines maintain continuous temperature and pressure during PUR/PIR and Rock Wool bonding, ensuring zero lamination bubbling and tensile adhesion exceeding 0.12 MPa.
We slit and rotate high-density mineral wool blocks by 90 degrees prior to pressing. This vertical filament alignment generates compressive strengths surpassing 150 kPa, allowing vertical structural spanning without sag.
Beyond panel extrusion, our design department provides shop fabrication drawings, fastener engineering calculations, and clash-tested BIM models to streamline GC approval on United States jobsites.
We source hot-dipped 55% Al-Zn alloy coated steel (Galvalume AZ150/AZ180) finished with high-durability fluoropolymer (PVDF) architectural coatings, backed by 30-year resistance against chalking, fading, and coastal salt corrosion.
By delivering matching subgirts, structural clips, butyl vapor sealants, flashings, and engineered hardware alongside our panels, we eliminate the interface liabilities common with third-party component sourcing.
Exporting experience spanning North America allows us to optimize 40HQ container packing with custom protective edge-guards, vacuum shrink wrap, and desiccant buffers, delivering pristine condition directly to East or West Coast ports.
Clear answers addressing code verifications, port logistics, minimum order quantities, and testing protocols for US General Contractors, Architects, and Procurement Directors.
Every batch of our fire-rated wall panels is manufactured to align with ASTM E84 (UL 723) surface burning characteristics, maintaining a Flame Spread Index (FSI) ≤ 25 and Smoke Developed Index (SDI) ≤ 450 to qualify for Class A ratings. For exterior multi-story curtain assemblies, we supply comprehensive test documentation and Engineering Judgments (EJs) covering combustible component positioning as governed by NFPA 285.
To prevent sheet bowing, paint abrasion, and edge crushing during intermodal transit, panels are bundled with peelable protective polyethylene films, stacked on custom rigid polystyrene cradles, reinforced with heavy-duty corner profiles, and shrink-wrapped with waterproof industrial plastic. We utilize dedicated flat-rack or 40HQ container load layouts with certified dunnage air bags.
Yes. Our automated double-belt lines permit continuous dynamic flying saw cuts customized to your architectural elevations up to 40 feet (governed primarily by container transport lengths). We supply concealed fastener double-tongue-and-groove joints, ship-lap joints, and deep architectural V-grooves designed to incorporate secondary butyl weatherseals.
Typical manufacturing cycles run between 15 to 25 business days depending on color customization and core density specifications. Ocean shipping transit takes approximately 18 to 28 days to US West Coast ports (Long Beach, Oakland, Seattle) and 28 to 35 days to US East/Gulf Coast ports (Houston, Savannah, Norfolk, Newark). CIF, CFR, or DDP terms are available upon request.
We manufacture exclusively modern non-halogenated Magnesium Oxysulfate (MOS) chemistry rather than obsolete magnesium chloride formulations. By eliminating free active chlorine ions, our interior boards are 100% immune to "crying board" water droplet weeping, protecting steel studs, fasteners, and interior decorative finishes from corrosive degradation.
Every container leaves our facility accompanied by Mill Test Certificates (MTCs), density verification data, tensile adhesive pull test results, and raw coil coating thickness analyses (dry film thickness check). We offer a 20- to 30-year structural warranty on panel integrity and fluoropolymer coating adhesion when installed according to our technical manuals.
Whether you are drafting specifications for a cold-chain distribution center, detailing a high-rise exterior curtain wall, or constructing cleanroom facilities, our engineering staff provides rapid structural calculations, takeoff services, and free architectural sample boxes directly to your U.S. design office.